Applications

One finish, eight places.

Microcement is a coating system, not a single product, so it adapts to floors, walls, stairs, benchtops, wet rooms and even pools. Each has its own rules, set out below. See the gallery.

A seamless sea-glass green microcement wet room with a curved bench and a window onto a Norfolk pine
01

Bathrooms & wet areas

No grout lines to trap soap film, and one surface from floor to wall. It is also the most technical place to use microcement, because corners, drains, niches and penetrations all need careful detailing.

  • Compatible with sound existing tiles after tapping, repairing and re-priming
  • Needs a sealer system specified for wet zones, renewed periodically
  • In Australian wet areas, compliant waterproofing (AS 3740) is a separate requirement from the decorative coating, carried out by a waterproofer licensed as your state requires

Suggested finishes
Emily BayNepeanPine Needle

A calm living room with a seamless limestone-coloured microcement floor curving into the wall
02

Floors

Open floors are the most economical place to use microcement because large flat areas apply quickly. Mesh is part of the floor system, and the substrate has to be sound and flat first, because 2–3 mm cannot hide a poor base.

  • Works over concrete, self-levelling screeds and sound tiles
  • Suited to underfloor heating when specified by the system manufacturer
  • Felt pads under furniture and a hard-wearing sealer for high-traffic areas

Suggested finishes
CalcareniteShell GritMount Pitt

Hands skimming a steel trowel across a fresh microcement wall with the edge of the fibreglass mesh visible
03

Walls & feature walls

On walls the trowel work is the design. The same system can be pulled tight and quiet or left with more movement. It can finish plasterboard, masonry, render and sound tiled walls, and can run into the floor without a skirting break.

  • Plasterboard, masonry, render and sound tile are all candidates with the right primer
  • Movement and tone vary by hand; that is the character, not a defect
  • Always judge colour from a physical sample in the room’s own light

Suggested finishes
Shell GritAnson BayRed Earth

A dark basalt-toned microcement island benchtop and splashback in a coastal kitchen
04

Benchtops & kitchens

A microcement benchtop can run into its splashback with no seam. Because it is a coating, not a slab, the base (board or cabinetry) must be rigid and the sealer chosen for kitchen use and heat, stain and chemical resistance.

  • Priced closer to joinery than to flooring, because of edges and labour
  • Ask any applicator which sealer is used and whether it is suitable for food-preparation surfaces
  • Dark finishes show scratches and etching differently from pale ones. Sample first

Suggested finishes
BasaltMount PittCalcarenite

A sculptural curved staircase finished in one continuous limestone-toned microcement
05

Stairs

Stairs show microcement at its most sculptural: tread, riser and wall become one object. The nosing is the hard part: detailing and slip resistance need to be planned before the first coat goes on.

  • Slip resistance can be tuned with the choice of sealer and finish
  • Edges and nosings are labour-intensive, so stairs price above flat floors
  • Existing timber, concrete or tiled stairs can often be overlaid if sound

Suggested finishes
CalcareniteShell Grit

A pale microcement pool terrace with a teal pool beneath tall Norfolk pines
06

Pools & surrounds

Surrounds are a natural fit: continuous and easy to hose down. Pools themselves need an immersion-grade system; several manufacturers sell dedicated pool microcement lines, and the system, chemistry and sealing regime must follow their specification.

  • Keep pool chemistry in range and avoid acids and bleach on the surface
  • Sun-exposed and chlorinated surrounds may need resealing sooner than interiors
  • Slip resistance matters on wet surrounds. Ask for a slip rating for the sealed finish (AS 4586)

Suggested finishes
CalcareniteAnson BayMount Pitt

A sculpted sea-green microcement vanity with an integrated basin and brass tap
07

Vanities & furniture

Microcement can be sculpted over a rigid core to make vanities, basins, benches, side tables and fireplace surrounds. A wall and a vanity in the same finish read as one carved piece.

  • Built over a stable substrate such as moisture-resistant board or masonry
  • Curves and radiused edges are possible and are priced as bespoke joinery
  • Match the vanity to the wall for one continuous mass, or contrast it for impact

Suggested finishes
Emily BayRed EarthPine Needle

A low coastal house with warm microcement walls beneath Norfolk Island pines
08

Exteriors

Exterior systems are specified for weather, UV and salt air. For Australian coastal homes, microcement can finish garden walls, feature façades, planters and paths, with a sealer that is maintained for the exposure.

  • Check that the system is rated for exterior use and for the climate
  • Salt air and sun accelerate wear. Plan to inspect and renew the sealer
  • Not a fix for rising damp or a failing wall, which needs repair first

Suggested finishes
CalcareniteRed EarthMount Pitt

Tell us what’s underneath. That decides everything.

The substrate sets the system, the price and the timeframe. Photos help.

Request a quote Order a sample board